主营：

节能空压机 ETC无油转换器 罗德康普EVO/EVO-NK系列主机 罗德康普NK/B系列主机 后处理及空压机耗材 免费技术指导选型

您刚好需要

我刚好专业

......

紧凑型主机EVO3-NK-G,EVO6-NK-G,EVO9-NK-G,NK200-G，德国rotorcomp，罗德康普主机，罗德康普动力，rotorcomp，rotorcomppower,

型号	建议电机功率 kw	7公斤时最大排气量 m³/min	压力范围 barg	净重 kg
Type	Recommended motor power min.- max.	Max. flow rate at 7 bar	Pressure range min. - max.	Net Weight
EVO3-NK-G	7.5 – 18.5	2.8	5 – 15	69
EVO6-NK-G	15 – 37	5.5	5 – 15	135
EVO9-NK-G	22 – 55	8.4	5 – 15	229
NK200-G	45 – 75	11.5	5 – 15	304

EVO9-NK-G Screw Air Compact Unit with Gear Drive

EVO9-NK-G带齿轮传动的螺杆式空气压缩主机

Power range up to 55 kW / 75 HP

功率范围高达 55 kW / 75 HP

Capacity up to 8.4 m³/min / 300 cfm

排气量高达8.4 m³/min / 300 cfm

Pressure up to 15 barg / 220 psig

压力高达15 barg/220 psig

Weight approx. 305 kg / 673 lbs

重量约为305 kg / 673 lbs

Our unique series of NK compact units are oil-injected screw compressor modules that integrate the main parts of a compressor system. This solution is the best possible way to build a reliable, compact and cost efficient complete compressor package with ultimate efficiency, low noise and the highest quality standards.

Our EVO-NK-G compact unit is an oil-injected screw compressor module that integrate the main parts of a compressor system and provide optimum operation reliability and reduced design costs for your compressor package.

The following components are integrated into each compact unit: EVO® oil-injected air end with ROLLING PROFILE®, intake valve with control unit and air filter, oil reservoir and oil separation system with coalescing cartridge(s), oil filter and oil thermostat valve, minimum pressure valve and non return valve.

Various options are also available, such as safety valve, oil level sight glass and maintenance indicators.

Advantages of our new EVO® technology

New ROLLING PROFILE® – ultimate efficiency with reduced noise

Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE®

Wide operating pressure range from 5 to 15 barg

High manufacturer assembling – "Made in Germany"

Quality assurance – bench test of every air end before leaving our factory

Easy application selection with our new ROTORCOMP® SIZING AIR Software

Highest flexibility for your package design

Suitable for all types of motors

Drive options: Belt drive, direct drive, internal gear drive

Base and face-flange mounting